8/28/2012
Assigned the project; set up the project website; contacted faculty advisor and Garmin

9/6/2012
First group meeting; telephone conversation with Garmin

9/13/2012
Assigned each team member's responsibility

9/20/2012
Began to write project plan

9/27/2012
Got the MCU board from Garmin; met with Garmin contact

10/4/2012
Determined the measurement circuit

11/15/2012
Tested the measurement circuit

12/15/2012
First stage is done; measurement circuit testing is done

1/14/2013
Began of the second stage

2/12/2013
ADC programming is done

2/20/2013
Began the system testing

3/14/2013
Confirm the final version of the circuit design and began PCB layout

4/10/2013
PCB Layout is done and delivered for fabrication

4/20/2013
Got the PCB board and began to solder the components on the board

4/25/2013
Began to test the board

5/1/2013
Final presentation and demo